This building can be used as a warehouse, a storehouse, a mini-shop, a garage, a sports hall, a shopping center. Production environment should be either non-aggressive or slightly aggressive.

 The constructions are produced in compliance with Construction Norms and Regulations (SNiP) III-18-75.

Arches of the framework consist of built-up sections bolted together, rest on the foundation and are welded to embedded elements. The overall stability of the building is provided by braces, girders and coating.

Single-layer coating or double coating (for heat-insulated buildings) made of galvanized or painted formed sheet is applied along metal girders with self-tapping screws and mixed rivets. 

Mineral-wool boards are used for heat insulation, and polyethylene film - as a vapour barrier.

 There is a hinged gate in the end wall of the basic model, but optionally it can be changed to another type or located according to the needs of the client and functions of the building. If necessary it can be equipped with window casements and rubber for glass attachment.

The building assembly is carried out on the prepared site with the foundation.

The following types of the foundation are recommended:

·  concrete post foundation;

·  containing concrete products;

·  metal frame fixed with anchors which are first driven into soil and then welded to the frame.

Easy of assembly, small weight of constructions make it possible to carry out erection works with minimum hoisting equipment in a short period of time. Introduction of hangars with overhead-track hoists (capacity – 5 tones) is underway.

 

 SPECIFICATIONS:

Width, m	9; 12; 15; 18
Height, m	4,5; 6,0; 7,5; 9,0
Post spacing, m	3,0
Length, multiple to	post spacing
Grade of fire resistance	EI -180
Snow load	IV, 1469 kgf/m2
Wind pressure	II, 294 kgf/m2
Seismicity	< 6 points
Design outside temperature	IV,-55 C